Nitinol super elastic foil/strip coil Nitinol sheet
Product Description
Density (g/cm^3) | 6.45 |
Melting point (°C ) | 1240-1310 |
Specific heat capacity( kJ/(kg·°C) | 0.46 |
Coefficient of thermal conductivity (W·m-1·K-1) |
10 |
Resistivity (10-6 Ω·m) | 80 |
Expansion coefficient (10-6 Ω·K-1 ) | 10.4 |
Elastic modulus (GPa) | 40-80 |
HV | 180-200 (low-temperature metallography) 200-350 (high-temperature metallography) |
Tensile strength (MPa) | 700-1100 |
Yield strength | 50-200 (low-temperature metallography) 100-600 (high-temperature metallography) |
Elongation δ % | 20-60 |
phase transition temperature (Af / °C) | -10-100 |
Recovery response variable % | 8, 6, 2 , <0.5 |
Utmost service temperature (°C ) | Af +60, 250 |
Maximum recovery stress (Mpa) | 680 |
Alloy | Chemical composition | Af (Fully annealed) | Min. elongation to failure [%] | Max. Residual elongation after 6% strain [%] | Main Applications | Specifications | |||||||
Superelastic Ni-Ti alloy | TiNi-SS | Ti-50.8at% | -5°C ± 5°C. | 10 | 0.1 | Eyeglass Frames, Cellular Phone Antennae, Bra Underwire | ASTM F2063 | ||||||
TN3 TNC | TiNiVAl TiNiCr | -40°C ~50°C | 10 | 0.1 | |||||||||
Body temperature Ni-Ti alloy | TiNi-YY | Ti-50.7at%Ni | Functional Af=33 ± 3 | 15 | 0.1 | Implantable devices,Bone staples Vascular Stents | ASTM 2063 | ||||||
Ti-Ni-01 | 55.6~55.8 wt%Ni | 20 - 40 | 15 | 0.1 | Guide wires, Stents Orthodontic Arches | ASTM F2063 | |||||||
High temperature Ni-Ti alloy | Ti-Ni-02 | 54.8~55.5wt%Ni | 45 - 95 | 10 | 0.1 | Implantable active devices, Surgical |
Product Categories : Titanium Custom Fabrication Services > Titanium,Titanium Alloy