aluminum die casting wire wheel footstand

High Precision Aluminum Die Casting for Motor Enclosure, the material for this part is A380, a kind of most common material, having good processability, for the physical property, this material have good thermal conductivity. It is commonly applied in home appliance, transmission housing, bracket of engine system etc.

For this parts, will have following some issue which should be pay close attention to

The surface roughness of casting should conform to the provisions of GB 6060.1.

casting does not allow cracks, porosity, bubbles and any penetration defects.

No defects such as scratches, dents, defects and mesh burrs are allowed in castings, but the extent and quantity of defects should be consistent with the standards agreed by both suppliers and buyers.

The Die Casting criterion carried on this part is Grade GB-CT4, according to the required tolerance and dimensions in terms of the prints, the part has difficulty on CNC machining, especially the rough turning, the section area of the injection gate is not small

High Pressure Die Casting is a technology that, inject the molten aluminum under high pressure, high speed into the cavity of the mold to solid to the part. So for this process, there usually to be turbulence flow, leading to air trapped in the part, so the porosity is unavoidable, however, this situation can be improved. Like us, a die casting manufacturer which specialized in die casting industry for more than 16 years, during the development of the tooling, we will run mold flow analysis prior to the building of the mold, to simulate the die casting work, to ensure the casting will have good density, by locating the major injection gate, cross gate, runner, the venting system reasonably.

Aluminum Die Casting Hardware Parts: Aluminum Casting of Radiator
Die Casting Machine: 800 ton
1 part per die
Material: ADC-12
Product Dimensions: 634mm*104mm*57mm
Casting Precision: Grade GB-CT4
Machining Precision: None
Technological Process: Die casting, Degate, Burring, Cleaning, Packing, Delivery
Control Measure: First item inspection, Routing inspection, Final item inspection, Incoming test and Outgoing quality control
Inspection Equipment: Calipers
Certificate: ISO/TS16949:2009
Lead Time: 30-35 days
Trade Term: FOB Ningbo